Erro: $0322: Conditions not correct or request sequence error ($22)

[suportec2]

Hi,

We tried read a S10 2.5 flex fuel 2017 with ECU E80, we bought Controller Authorization Code, but when trying reading stops and error appears "ERRO: $0322: CONDITIONS NOT CORRECT OR REQUEST SEQUENCE ERROR ($22)"
Does anyone know what can it be?
22519
22520

[joecar]

What (year/model) did the ECU come from...?





$0322
Conditions Not Correct or Request
Sequence Error
A request was made by FlashScan or
AutoCal and the controller was not able or
ready to handle the request.
This error may occur prior to reading or
flashing late model GM controllers (2017+)
that use GM’s enhanced security, if the
supplied key is incorrect.
If you are attempting to read or flash a late
model GM controller (2017+), contact your
tuner to obtain the correct key for your
controller.
Retry the operation.
Contact EFILive if this error persists.

[GMPX]

Your trace files are from the 6th and 7th of November, are these the correct ones for the car you are dealing with given you posted about this problem on the 20th?

Anyway looking over those trace files the 'Key' value the software is sending back is zero's which is why it fails. Are you able to Email the Auth-code you got for this vehicle to support@efilive.com so we can make sure the Key in that code is not zeros.