Can't find tuning pids

[robof16]

Setting up new laptop and can't figure out why "tuning" PIDS are not in the Scan Tool F8 list (System - "Tuning")

[joecar]

What specific pids are you looking for.

Had you previously used these pids on V7 or V8...?

Post a log file.

[robof16]

Thanks for the reply,

Looking for CALC.WO2BEN, CALC.VET, etc.
Followed the "Calc.VET: correcting MAF and calculating VE (in single log)" sticky and PIDS look good on desktop but missing the PIDS in question on laptop.

No log file yet, just got WB and trying to get laptop ready to tune my first LS project.

[joecar]

...

Looking for CALC.WO2BEN, CALC.VET, etc.
Followed the "Calc.VET: correcting MAF and calculating VE (in single log)" sticky and PIDS look good on desktop but missing the PIDS in question on laptop.

...

Those pids exist in V7... for V8 you would have to create them... I'll post a pid file for V8 shortly.

[robof16]

Referring to V7.
I have latest version of both (V7.5.25 for example)
Just can't figure out why some PIDS are missing.
First pic is the PC: In the "System" column you can see the "Tuning" PIDs. As far as I can tell these are the only PIDs missing on the laptop PID list.
22533
Second pic is the laptop.
22534

[joecar]

On your laptop, do you have the same calc_pids.txt file in the folder C:\Users\<you>\Documents\EFILive\V7.5\User Configuration...?

[robof16]

OK, so I thought I did but apparently not the same as the desktop. The calc_pids.txt file in the laptop folder was copied from the Calc.VET: correcting MAF and calculating VE (in single log) sticky I think.
That fixed it.
Rookie mistake

It would be nice to have the V8 file also
Thanks!

[joecar]

No worries.

I'm putting together some calc vet stuff for V8 (pids, charts, maps).