PDA

View Full Version : Vats E92



Road
December 13th, 2018, 01:41 AM
I have a 2019 E92 ecm needing to get Vats patch done. Any chance getting it added in?

Thanks

GMPX
December 13th, 2018, 08:56 AM
Hi Mike, I can look at this today no problem. I'll post up the .calz file here.

Road
December 13th, 2018, 10:04 AM
Hi Mike, I can look at this today no problem. I'll post up the .calz file here.

Thank you

GMPX
December 13th, 2018, 02:57 PM
Hi Mike,

Try this .calz file.
Save in to:
C:\Program Files (x86)\EFILive\V7.5\Calibrations\E92

I think all you'll need to do is this:
G1210 = Set to type 2 or 3
B9903 = VATS Patch - Apply
G1219 = Disable
Then FULL flash so the B9903 patch is taken by the ECM (this only needs to be done once, cal flash from then on is fine).

Cheers,
Ross

Road
December 14th, 2018, 01:02 AM
Hi Mike,

Try this .calz file.
Save in to:
C:\Program Files (x86)\EFILive\V7.5\Calibrations\E92

I think all you'll need to do is this:
G1210 = Set to type 2 or 3
B9903 = VATS Patch - Apply
G1219 = Disable
Then FULL flash so the B9903 patch is taken by the ECM (this only needs to be done once, cal flash from then on is fine).

Cheers,
Ross

That was fast
Thank You!

GMPX
December 14th, 2018, 10:59 AM
It was a nice way to finish up on a Friday afternoon :grin:

74n72impalalq94l80
April 30th, 2019, 10:05 AM
do we license e92 same way we do gen3 and gen4 or are there extra steps. I just got a call from potential customer

GMPX
April 30th, 2019, 10:38 AM
Yes for the most part, but it also depends on the year model, from about 2017 and up the ECM's also require an Authorisation code to be purchased ($50) plus the $125 VIN license fee.