PDA

View Full Version : Error code



Gmpsy
February 26th, 2019, 07:49 PM
Have a hard code of ECM-P06A3. Reflashed and the first run everything is clear but code returns on restart. Can I get some help on how to fix?https://uploads.tapatalk-cdn.com/20190227/5dea343952dfa0a68cd87dfc32c0bda9.jpg

Sent from my Moto Z (2) using Tapatalk

GMPX
February 27th, 2019, 10:39 AM
P06A3 = 5 Volt Reference 4 Circuit

Gmpsy
March 3rd, 2019, 01:59 PM
GM says EGR position sensor. Not understanding why after reflashed it only throws code AFTER shut down of first run. If it is position sensor why doesn't it throw code DURING first run? Or is it EGR sensor?

Sent from my Moto Z (2) using Tapatalk

GMPX
March 3rd, 2019, 02:35 PM
GM says EGR position sensor.
Ah ok, although this link is to a Cruze the DTC numbering is consistent across all GM vehicles. Unless they mean your EGR position sensor is bad and is causing the 5V ref error.
http://www.autocats.ws/manual/chevrolet/tis0911/en/documents_2012/Cruze/SM-T/92566197.en.html

(http://www.autocats.ws/manual/chevrolet/tis0911/en/documents_2012/Cruze/SM-T/92566197.en.html)

Gmpsy
March 3rd, 2019, 03:01 PM
WOW! Great Response! Thanks! Hopefully this will help me diagnos my problem.

Sent from my Moto Z (2) using Tapatalk