View Full Version : E40 missing PID's
mysunnshine
April 8th, 2019, 05:01 AM
I'm logging on to a E40 and I have very limited PID's showing available other than a list of external PID's. I can read the cal as normal and have no connection issues to the ECU that I know of. Any ideas?
ScarabEpic22
April 8th, 2019, 06:03 AM
Every new vehicle you connect to, you should repoll for supported PIDs. Info -> Validate PIDs. Also make sure you select E40 when you connect to the controller.
mysunnshine
April 9th, 2019, 12:35 AM
Every new vehicle you connect to, you should repoll for supported PIDs. Info -> Validate PIDs. Also make sure you select E40 when you connect to the controller.
That was exactly it. I always select the controller but I have never had to repoll for the supported PIDs before. Thanks for the info-
ScarabEpic22
April 9th, 2019, 06:34 AM
That was exactly it. I always select the controller but I have never had to repoll for the supported PIDs before. Thanks for the info-
Cool, glad it's working now!
joecar
April 14th, 2019, 12:02 PM
Good deal :cheers:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.