Unlinking,previous firmware V2.07.104

[TRUCKCANCER]

Received un-linking instructions and my AutoCal device must be using firmware V2.07.104 or later. Can I reinstall previous firmware? Where would I find it?

[ScarabEpic22]

You cannot downgrade firmware, as long as your firmware is newer than this version you can un-link it. This functionality never existed prior to this firmware update, so even if you could go to an earlier version (which you cannot) you wouldn't be able to un-link. Current firmware is 2.07.139 in the latest software (Feb public release). Download the V8 software and upgrade your firmware, then you'll be able to un-link.

[TRUCKCANCER]

You cannot downgrade firmware, as long as your firmware is newer than this version you can un-link it. This functionality never existed prior to this firmware update, so even if you could go to an earlier version (which you cannot) you wouldn't be able to un-link. Current firmware is 2.07.139 in the latest software (Feb public release). Download the V8 software and upgrade your firmware, then you'll be able to un-link.

Firmware was updated before unlinking and I keep getting a error

[Steve.runge]

Truckcancer. were you able to get this resolved? I'm having the same issue.

[cindy@efilive]

Truckcancer. were you able to get this resolved? I'm having the same issue.

Most likely a blank space after the final character.


Sent from my iPad using Tapatalk

[Steve.runge]

I've tried that and it still wont work.

[eirraider]

I am having the same problem. Any answer on this?

[cindy@efilive]

If you meet the firmware requirement, the most likely issue is you have a space at the end of your code.
If the code does not function, please speak with your tuner so that they can generate you the right code.

Cheers
Cindy