PDA

View Full Version : Delphi MT88 PCM Bench Harness Info Etc



xx_ED_xx
April 20th, 2019, 10:26 AM
I ended up with this pcm (see pics) running a fairly new big block. year model 2017.
The very limited info I could find about this pcm seems it was also used on some GM crate engines etc.
I am hoping to make an information thread. As well as a bench harness to read it "hopefully"
Feel free to add info if you know anything about these pcms.
Thanks
2278422785

I tried this setup with no luck
J1-19=battery pos
J1-20=battery pos
J1-43=can low
J1-29=can high
J2-13=switched 12v+
J2-28=switched 12v+
J2-73= gnd

GMPX
April 20th, 2019, 10:44 AM
These ECM's are not running any software like what GM Delphi ECM's have, many of them use some form of J1939 comms (like the MEFI ECM's did), sorry but EFILive probably will not even talk to this ECM even if you get the bench harness wired up correctly.

xx_ED_xx
April 20th, 2019, 10:54 AM
Thanks GMPX, I was thinking since it has similar plugs to a e67 either converting it or using a whatever pcm the gas 6.0's uses in the newer trucks. I was cross referencing wiring vs an L96 pcm pinout and so far a lot of things are similar.

efiharness
May 7th, 2019, 02:37 AM
IF you need any info on these controllers, give me a call as we have used these. Steve 909 910 3867