PDA

View Full Version : Peer Check Request: calc_pids


ajm390
July 6th, 2019, 09:08 AM
I recently installed an analog wide-band controller in a swap vehicle. I'm hoping I can get a peer check on my calc_pids file before I start the calc.VET process.

Thanks in advance!


22924
joecar
July 16th, 2019, 08:57 PM
I'm taking a look (sorry I was out of town for work).
ajm390
July 20th, 2019, 01:11 PM
Thanks, Joecar.

I should have stated up front, to maybe allow others to chime in, that I was looking for help with file structure aside from the linear equation; that part is OK. I'm more looking for conformation on ensuring that the I've set the remainder correctly.

Thanks again
ajm390
August 14th, 2019, 11:53 AM
Anybody still around?
joecar
August 25th, 2019, 02:40 PM
I'm here... sorry, I've been out of town for a while.
joecar
August 25th, 2019, 06:21 PM
If the lambda(voltage) equation is correct, I would do it like this...
ajm390
August 29th, 2019, 11:46 AM
If the lambda(voltage) equation is correct, I would do it like this...

Appreciate the review.

Seeing as the CALC.VET (MAFT) tutorials are going on 10 years old, is there an updated *suggested* list of PIDs to log ?

I am currently set up as follows for a P59 pcm:

23003