PDA

View Full Version : Fuel Filter Restriction


RDLLC
August 29th, 2019, 11:46 AM
I am tuning a 2015.5 and starting to make some power. Every time I floor it the fuel filter life goes to 0% on the dash (about a 120hp tune). Is there anything that can be done to make it less sensitive? I can unplug the sensor but would rather not have to do that on every truck. Im sure someone has ran into this before.
rcr1978
August 29th, 2019, 03:13 PM
Your draining the rail, watch your logs, either pull some full out of it or get a lift pump.
RDLLC
August 31st, 2019, 09:42 AM
Why am I not getting a P0087 if this is coming from low fuel pressure?
rcr1978
August 31st, 2019, 02:26 PM
My LML doesn't either, drains the rail then fuel filter life goes to 0%. It's not the same as the older trucks.
RDLLC
September 2nd, 2019, 03:14 AM
Yes that’s what this one is doing. Thanks!
FC5452
September 3rd, 2019, 11:55 AM
Shut the fuel minder switch off. The only thing that will set a code is the 0087 as you know,
It does not take much to trip that stupid switch, add a lift pump as stated.