PDA

View Full Version : safe mode on 5.7



Mike W
September 7th, 2019, 11:37 AM
Can any one point into a direction that solve a safe mode issue on 2004 Monaro CV8 vehicle. The vehicle will randomly go into safe mode and we haven't been able to find the cause codeP2125 logs but I don't believe he throttle peddle is the issue.

gmperformancecentre
September 8th, 2019, 09:10 PM
try a different Thottle Postion Sensor

Mike W
September 8th, 2019, 09:38 PM
Don't have one spare to try. However I have managed to get a hold of Holden power train specialist, Holden don't have a part replacement currently on hand but the unit was manufactured in England, hoping they can help with the peddle sensor issue.

Mike W
September 8th, 2019, 10:11 PM
try a different Thottle Postion Sensor

2301023009

I appreciate your reply, anychance that you could take a look at the photos at let know your view on the circuit board

joecar
September 10th, 2019, 10:34 PM
Can you check continuity across the solder joints.

Look at each one thru a magnifer/lupe, see if there are any cracks in the solder joints... you may have to reflow the solder.

The "wiped" areas of the traces: can you clean these (rub very lightly with brass wool, just clean them, do not take metal off).