Speedometer Calibration help please

[Madmax]

I purchased an inline Dakota Digital Pulse Generator to get the speedometer feed to my 411, it has an output of 8000 pulses per mile. I am unsure how to scale this into the "H101 Pulses Per Kilometre, and H102 Pulses Per Revolution" blocks in EFILive. Has anyone gotten this figured this out? I am getting a headache trying to figure it out.

[ChipsByAl]

What kind of transmission are you using?
Al

[Madmax]

4L60E, it is in an 80's car so I had them put cable drive on it for the speedo.Knowing that I could pickup the Dakota Digital unit. I know 8000 pulses per mile. I think they said 4 pulses per revolution, not sure though.

[VirgilWehner]

I purchased an inline Dakota Digital Pulse Generator to get the speedometer feed to my 411, it has an output of 8000 pulses per mile. I am unsure how to scale this into the "H101 Pulses Per Kilometre, and H102 Pulses Per Revolution" blocks in EFILive. Has anyone gotten this figured this out? I am getting a headache trying to Squid Game Online (https://squidgame-online.com) figure it out.

Hello Madmax, I see you are still not satisfied with the answer above. I will help you.

H102 = Pulses per Driveshaft Revolution. For example, if the speed sensor is attached to the transmission and sends a signal every time the driveshaft rotates one revolution, then H102 reflects the number of pulses. Do you see the problem?

[joecar]

VirgilWehner, Thanks, and Welcome.