Ls1 pcm

[Harrismarine]

I use allot of 411 (blue/red connector) as we almost always use cable throttle. I know some use the PCM with blue/green connectors with cable throttle. Is there particular blue/green ones that can and cannot be used with cable throttle?

Mike

[joecar]

To be used with DBW/ETC throttle, the PCM board must have the transistor/IC drivers, otherwise it can only do cable throttle.

[aaronc7]

https://www.lsenginediy.com/comparing-gen-iii-controllers/

[Cougar281]

To be used with DBW/ETC throttle, the PCM board must have the transistor/IC drivers, otherwise it can only do cable throttle.I think the question was if there were DBW 0411's that could or could not be used for DBC... I'd assume (could be wrong tho) that if its hardware capable of running DBW, it could be tuned to run DBC.

Sent from my HTC U11 using Tapatalk

[Harrismarine]

Perfect thanks