PDA

View Full Version : E98 - Fundamental Mode Details



PHLTHS
October 26th, 2020, 10:02 PM
Hi All

Wanted to ask a few questions about the E98 if anyone knows?
I've noticed throughout the tune there is a lot of reference to the multiple different altitude’s tables, however is there any way to tell what thresholds the ECM used to switch between each of them?

1: Low Alt
2: Med Alt
3: High Alt

Also, I've noticed throughout the tune there is a lot of reference to the multiple different mode tables.
I think they are the different combustion modes that can be logged using the COMBUSTION MODE COUNTS PID, is this correct?

1: Normal Mode
2: Alternate Mode 1
3: Alternate Mode 2
4: Alternate Mode 3
5: Alternate Mode 4
6: Alternate Mode 5

Throughout the tune there is a lot of reference to the different Pattern modes. I know the following to be true:

1: Pattern 1 = Pilot-Injection #1 only
2: Pattern 2 = Pilot-Injection #1 & Pilot-Injection #2

I’m not sure how to tell which of the Pilot-Injections are being used. I can use the Injection Event Active Status, but it only tells you that the Pilot Injection is active, not which one or if both are?

1: Pattern 1
2: Pattern 2

B0609 - Turbo Protection EGT Threshold
The ECM will enter turbo protection mode when EGT rises above these thresholds. Is this referencing to the B1S1 or B1S2 sensor?

jb007
February 18th, 2023, 05:47 PM
Hi,
Did you find any details on this? I'm interested as my tuned car is lacking power at 500m and feels like somehow it is in a medium altitude table with reduced boost etc when it shouldn't be as 500m is not high. My MAP sensor is fine and barometric sensor from the ecu also reads accurately

Thanks !