V2 and PLX wideband?

[pavetim]

Anybody successfully get a PLX wideband to show up using the serial port in efilive. I for the life of me cannot. I have the SM-AFR and it has a Tx port which is a 3.5mm stereo jack serial output. I have the cables i used for my innovate and that works great for my innovate, only difference for the PLX is i have to use a 2.5mm to 3.5mm adapter. Any ideas i cannot get this thing to show up

[joecar]

Could Tx and Rx be accidentally swapped?

[pavetim]

Dont think so cause my wideband innovate works fine. The only difference between innovate and plx is i need to use a 2.5mm to 3.5mm adapter on the plx. I will play and see if i can get analog to show up, somewhere i read analog updates faster than efilive anyways so serial no better. Not sure how true that is though

[THEFERMANATOR]

The PLX requires adding in a ttl to rs232 serial port to work.

https://forum.efilive.com/showthread.php?28000-PLX-SM-AFR-Serial

[SV8346]

PLX SM AFR TX & RX Ports are for daisy chaining to other PLX Devices.