CM2150 Support

[Strokerz]

When will there be PID's available?

[GMPX]

The problem we ran into is inconsistency between all the years of OS's on this ECM.
Most of the time many of the PID's are ok to use but sometimes they will simply not work between two different applications using the CM2150.
We've not been able to come up with a workable solution to overcome this (aside from simply limiting the selection of PIDs down to a bare minimum).

[Strokerz]

I see a CM2150E has been identified in the latest update. I have a CM2150D and most of the PID's do not work. I get RPM but I really need EFT's.

[GMPX]

You need to select just the 'CM2150', not the 'E' version as that one was the one that was different to all before it.

[Strokerz]

You need to select just the 'CM2150', not the 'E' version as that one was the one that was different to all before it.

Thank you. I’ll try that.