AUTO VE BOOST TABLE ?? COMMANDED #'s

[nitrorocket]

I run a custom O.S. 3, My question is I have the entire multiplier table set to 1 (14.67:1) except for the 90,95,100,105 columns on the Main VE table. I have the last column for 105 set at .9 like the tutorial says. Why .9???? should'nt it be a higher # to reflect a richer mixture for the boost table??

[Dirk Diggler]

for a boosted car you will prolly want an AFR between 11.5 and 11.7 in EQ Ratio (and be careful here because it sounds like your untis are lambda) you want an EQ Ratio of 1.22-1.25. To change the units goto Edit--->Properties

[nitrorocket]

The eq ratio is set to 1 and the car is tuned perfectly and making huge power. Should I just leave it alone??? AFR for wot is always great.

[Dirk Diggler]

After i read your post again i am a moron. How you have it set is ok since you are seing low boost/not to much load at these KPA's. My post was refering to WOT LOL jeez i feel like a noob LOL