Up-to-date FlashScan v2 Won't Work With 2019+ Ram

[Jim P]

All my software, FlashScan v2 is up-to-date but I can't get it to work with the 2019+ Ram 6.7L. Don't see any CM2450 CMF options at all. What am I possibly missing here?

[GMPX]

"Don't see any CM2450 CMF options at all." What are you trying to do, scan, tune?

[Jim P]

Scan. Looks like I’m the documentation there should be some PIDs I can set for scan and logging on the v2 but nothing comes up with CMF, stops at CME.

[GMPX]

V8 allows some generic PID's to be logged, but for these ECM's it is mainly based on EDA logging which does mean the ECM needs to be running a CSP5 OS, not the normal OEM OS.

[Jim P]

So can only be done when on pass-through with the v2 and v8 software? I didn’t use a CSP OS on the truck.

[GMPX]

No, you can program the PID's into the V2 using V8 for BB logging. But the PID's aren't great on the CMF which is why we did EDA (where possible).