View Full Version : Up-to-date FlashScan v2 Won't Work With 2019+ Ram
Jim P
May 9th, 2021, 04:23 AM
All my software, FlashScan v2 is up-to-date but I can't get it to work with the 2019+ Ram 6.7L. Don't see any CM2450 CMF options at all. What am I possibly missing here?
GMPX
May 9th, 2021, 09:45 AM
"Don't see any CM2450 CMF options at all." What are you trying to do, scan, tune?
Jim P
May 9th, 2021, 09:49 AM
Scan. Looks like I’m the documentation there should be some PIDs I can set for scan and logging on the v2 but nothing comes up with CMF, stops at CME.
GMPX
May 9th, 2021, 10:14 AM
V8 allows some generic PID's to be logged, but for these ECM's it is mainly based on EDA logging which does mean the ECM needs to be running a CSP5 OS, not the normal OEM OS.
Jim P
May 9th, 2021, 10:17 AM
So can only be done when on pass-through with the v2 and v8 software? I didn’t use a CSP OS on the truck.
GMPX
May 9th, 2021, 11:19 AM
No, you can program the PID's into the V2 using V8 for BB logging. But the PID's aren't great on the CMF which is why we did EDA (where possible).
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.