Scanning AFR Err

[Rick_Abraham]

Hi guys,
I have been a HPTuners user for a while and now have purchased EFI Live as well.
When tuning the VE table using HPTuners I usually setup the scanner to log AFR Error in % (Commanded AFR vs Actual AFR), I have wired my Innovate LC2 Wideband directly to the HPTuners MPVI2 unit.
This works very well and allows me to update and correct the VE table very quickly.

How do I do the same with EFI Live's scanner and the V2 Flashscan unit ?, does anyone have a nice tutorial explaining step by step how to do this ??

Any help with this would be greatly appreciated.

Cheers Rick

[RC1]

Did you ever get this sorted out?

[Rick_Abraham]

Did you ever get this sorted out?

Hi yes thanks, I found some info online and managed to figure it out.

[joecar]

Rick_Abraham,

Welcome to EFILive :cheers:


Are you connecting your LC-2 using the 5V analog interface or the Serial Comm interface?

[joecar]

You can use Commanded AFR and Wideband AFR...

I prefer to use Commanded EQR and Wideband Lambda, the BEN correction is the product (i.e. multiplication) of those (don't have to remember which is numerator/denominator)... the Calc.VET thread shows how to setup a calc pid for this.

[Rick_Abraham]

Hi am using the 5V analog interface