Black Box Logging Bug ?

[Ninety8C5]

I selected 18 PID's to program into the Black Box, but when I read it there were 19 PID's programmed. After looking at it several times :Eyecrazy: and double checking everything, I found that SAE.ECT was listed twice in the Black Box. I unselected SAE.ECT from my list and SAE.ECT was not in the list in the Black Box (17 selected, 17 programmed). I then selected SAE.ECT again and it was listed twice on the Black Box list(18 selected, 19 programmed).

I don't know if this happens with any other PID's or if anyone else also has the problem, but it drove me crazy for awhile.

:nixweiss:

[joecar]

From the ReadMe.rtf file on your hard disk...




10. Black Box Logging (and Multiple {SAE.ECT} PIDs):
If you do not select a full compliment of PIDs to log during Black Box logging, the unused channels will be allocated to the {SAE.ECT} Engine Coolant PID.
That may cause the {SAE.ECT} PID to show up multiple times in the Black Box logged data. (Note: Prior to V7.3.011, EFILive used the {SAE.TP} PID instead of the {SAE.ECT} PID).