problems logging a 07 c6zo6/ls7

[dian]

i had no problems with the 99 c5/ls1. here some weird stuff going on:

1) sae.tp is btwen 25 and 88

2) calc.injdc2 is between 80 and 3214 (%)

3) gm.ibpw2 is between 23 and 610 ms

@6000 rpm ibpw is 600 ms and indc is 3000

4)gm.engoilp goes to a max. of 6 bars, dips after closing throttle and then jumps to 7 bar. is this real?

gm.eosp and calc.eosp are identical and do the same (3.4 → 3.7 v). is oilpressure measured or calculated?

oil temperature is in the other thread. i assume trans/diff temp. cant be logged, right?

[minytrker]

E38 uses different pids, your not logging the correct ones.

[dian]

thank you, but what pids should i be logging? they are all validated and i dont see any other ones. e.g. sae.tp-b is the same.

[joecar]

For E38 use GM.ETCTP, and GM.INJPW1 and 2 (there are only 2 pids named like this)... you will need a calc pid for DC%.