PDA

View Full Version : 3.0 duramax



derkscustomcars
November 18th, 2021, 05:00 AM
Hello,

Since gm uses the E98 in older trucks, will efilive support the E98 found in the newer fullsize trucks used with the 3.0 duramax?

Thanks

GMPX
November 18th, 2021, 08:38 AM
It is not an E98, it is an E46 which unfortunately uses GM's new security of digital signing of the calibrations, no support is the likely outcome.

derkscustomcars
November 18th, 2021, 09:09 AM
Well, my mistake..

Sent from my XP8800 using Tapatalk

Muscleup12
January 25th, 2023, 03:18 PM
It isnt, but it is based off the same conti0100 firmware/software. Someone with mapping experience should be able to do this fairly easy. The problem is flashing it successfully/unlocking the 5 bye seedkey. Currently 5 possible options that I have found.
1, Bruteforce attack, takes up to 7 days for seed key.
2, EMI fault injection to accept seed pass(colin flynn) PicoEmp
3, A certain GM software that doesnt require SPS
4, SPI/Lin bus reading/programming through secondary chip, possible but takes smarter minds than me.
5 Aftermarket ECU, such as the mercury marine 3.0L boat motor, ECU is $1200,
https://www.mercurymarine.com/en/us/engines/diesel/mercury-diesel/30l-150-270hp/
Dont know if the pin harness is the same, cant find too much info on it.


This project really needs a team to do it, I have got pretty far with everything but am currently stuck at mapping the bin files.

Lennydmaxguy
March 29th, 2023, 10:57 PM
The E46 can now be unlocked. Hopefully someone can map out the tune and maybe Efilive will at least give us the ability to flash them. https://controllerdiagnostics.com/products/gm-e46-controller-modification-service