LastCall
January 30th, 2022, 04:26 PM
I've been using an AFR500V2 for the last 5-6 years and it has worked great. The analog outputs not to much.
I grabbed their new CAN-based AFR500 and tried to get it set up while I was on the dyno yesterday. No nice.
I followed these instructions:
https://www.bmotorsports.com/download/products/o2/AFR500CAN_Manual.pdf
I can see the wideband in V8, can select the PIDs in scanner, and while data logging, the values are not coming through as sane values. I used the Ballenger CAN programmer and verified it was set to EFILive. For reference, the wideband display is showing 16:1 (free air). Here is what the data looks like in the scanner:
24027
I grabbed their new CAN-based AFR500 and tried to get it set up while I was on the dyno yesterday. No nice.
I followed these instructions:
https://www.bmotorsports.com/download/products/o2/AFR500CAN_Manual.pdf
I can see the wideband in V8, can select the PIDs in scanner, and while data logging, the values are not coming through as sane values. I used the Ballenger CAN programmer and verified it was set to EFILive. For reference, the wideband display is showing 16:1 (free air). Here is what the data looks like in the scanner:
24027