LWM Calibration files

[Babymaxxx]

I downloaded my stock 2.8 LWM file and I notice I don't have as many calibrations as I've seen say on a 6.6 Duramax or what not...
I.e. There's no EGR calibration folder / table.
then only place i see that is in DTC, that if i wanted to say control the function's of the EGR valve.
Or say the DPF settings tables


pic for attention

24030

[GMPX]

There is no emissions control parameters or tables for these.

[Babymaxxx]

There is no emissions control parameters or tables for these.
Ahhh i gotcha so out of curiosity …. I have a tune , and emissions / egr/ dpf / amongst other shit is included in the tune , i load it it on with autocal / what not … how is it that that tune was able to be built if these parameters / tables aren’t available for these trucks ?

[modpcm]

Hi, tuners have other software to edit raw file, e.g. winols , or create their own CAX file so you can add your own tables , efilive is use as a downloader at that point

[Babymaxxx]

Hi, tuners have other software to edit raw file, e.g. winols , or create their own CAX file so you can add your own tables , efilive is use as a downloader at that point
Ohhhhhhhhhhh ok ok