2016 lml service 4wd after cal flash

[twitchygauges]

Segment Description Part# Checksum Comments
Boot Software 12664192 $4ED3
Main Operating System 12669774 $53C5
Engine 12660135 $83C3
Speedometer 12660409 $D4F4
System 12660406 $8649
Fuel System 12660398 $5A86
Engine Diagnostic 12672325 $0D52
Engine Operation 12672313 $6693

I lose com with tccm after cal flash. Im sure the issue is with can messages but not sure where. Any help would be great.

[Whozzat]

Segment Description Part# Checksum Comments
Boot Software 12664192 $4ED3
Main Operating System 12669774 $53C5
Engine 12660135 $83C3
Speedometer 12660409 $D4F4
System 12660406 $8649
Fuel System 12660398 $5A86
Engine Diagnostic 12672325 $0D52
Engine Operation 12672313 $6693

I lose com with tccm after cal flash. Im sure the issue is with can messages but not sure where. Any help would be great.

You have to do a full flash on LML. You can't cal flash

[twitchygauges]

You have to do a full flash on LML. You can't cal flash

I did a full flash originally. Then just cal flashes when making adjustments. I think it’s an issue with my can settings. I’ll have to play with them if I can get the truck back with more time.

[Whozzat]

You can't do cal flashes at all with LML. At least that is my understanding