May 05, 2022, V8.3.23 Public Pre-Release

[Blacky]

V8.3.23 Public Pre-Release



Full Release Notes:
Whats New (https://download.efilive.com/Software/whatsnew_8_3_23.htm)


Version Numbers:
After installing this release you should have the following software and firmware versions installed:




[*=1]EFILive V8 software: V8.3.23
[*=1]FlashScan/AutoCal V3

[*=1]Firmware: V3.00.091 (May 05, 2022),
[*=1]Boot Block: V3.00.006 (Feb 27, 2022)




Download here:

Download V8.3.23 (https://download.efilive.com/Software/V8/EFILiveV8.3.23_Setup.exe)


Known Issues:


Issue #1: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However, the DMA PIDs may no longer return valid data.
Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

Issue #2: Y-axis at the right of each chart are justified-right instead of left.
Workaround: None, will be fixed in the next update.



Regards,
The EFILive Team