2020 cm2450b/aisin stock tune file

[karch_13]

Hello everyone, I've tried searching for a stock tune file for my 2020 RAM 3500 but didnt find anything. Is there a place that i can get this from or would someone be willing to sell it to me? Thank you in advance.

[Jim P]

I got a pile of them, what's the cal number on your ecm? It'll be an IA800xx.xx

Post up that number and I'll attach a tune file for you.

[karch_13]

Thank you Jim P,
My calibration number is IA80034.02

[Jim P]

Here you go.

[karch_13]

Thank you.

[thestuarts]

I got a pile of them, what's the cal number on your ecm? It'll be an IA800xx.xx

Post up that number and I'll attach a tune file for you.


I have a 2019 with CM2450B/aisin. The cal number is IA80002.17. Do you have a stock tune that correlates to PCM version 52401932AK which the dealer installed due to TSB TSB 18-010-21?

Thanks!

[Jim P]

Here is the .17 revision and the .21 revision which is CSP capable. Also have the .23 revision if desired.

[thestuarts]

Here is the .17 revision and the .21 revision which is CSP capable. Also have the .23 revision if desired.

Yes to the .23 version. Thank you!

[Jim P]

Here's the .23 revision

[thestuarts]

Here's the .23 revision

Thank you very much.

[Jim P]

:thumb_yello:

[karch_13]

Would you happen to have calibration file for IA80027.04 for CM2450B?

[Jim P]

Here you go sir.

[DouglasG]

Hello I have a ram 5500 CM2450b, IA80003.16 maybe do you have?

[Workbot]

hello I any looking 2020 ram 5500 cm2450b IA80091 P5361032PB or know of one that will work thank you

[tsbrianesi]

Hi guys, I couldn't help but see your conversation...

I'm looking to know more about the cax files and also looking for stock files from IA80051.* Before the original Incal files I have from IA80001 to IA80051 I know there is much more.

Would anyone have them?

[Iveco]

you wouldn't happen to have a file for a 2018 ram cummins 6.7 3500 with aisin trans would you ? cummins ecm code is D090019.02BDC operating system is 52150101

[Hoseman]

Looking for 2450B 2019 3500 Aisin
E/C IA80003.15. ESM 59100698

[trudynosports]

I have attempted to flash a 19 5500 and it fails with a checksum error at the end. I was unaware of the new updates on these trucks. I'm looking of for the stock file to try to recover this truck. The stock part number was S5361932PB. I cant read the cal number as the ECM is dead right now, but I think its IA80088.01. I tried flashing an older version of a stock file and it fails as well so I's assuming I can only flash the latest one.

[BYTES]

Ur bricked ecm will be a nice thanksgiving decoration piece ��

[iw11]

Are these stock tunes only to unlock ecm, or are the runable stock tunes.

[powerdmaxcummin02]

i am looking for a stock file for a 2021 cummins 3500 with aisin os # 152190700 cal id 52401932AI cummins ecm code AI80002.21 BHQ

[tsbrianesi]

I have this IA80002.23, can you help?

[wdieselrp]

Hey Jim P, can you help me out with a file? IA80113

[jtdrns]

anyone have incals for 23-24 ram bhq

[greenenthusiast]

Hey do you have for 22 3500HD B6.7 Cummins w Aisin AS69RC transmission IA80004.03 (or it might be IA800054.03)

[jtdrns]

i have up to ia80061 would like to have newer but theyre not on the server, anyone have a way to convert .efd flash to xcal? i have latest just in .efd format

[Jim P]

Hey Jim P, can you help me out with a file? IA80113

I don’t have that calibration

[alexandereva]

so im confused with everyone needing stock tune files are they the same as what you get off quickserve?

[wdieselrp]

so im confused with everyone needing stock tune files are they the same as what you get off quickserve?

If you can download them from quickserve, let me know .

[Jim P]

Show me that Cummins allows access to downloading any Ram Cummins calibration after 2018

[alexandereva]

im new to all this why doesnt it allow you?

[Jim P]

Because laws changed

[gcastro1213]

Here's the .23 revision

Someone can help me with stock file 2020 Cummins AI80012

[gcastro1213]

Quick question fellas I got problem with the exhaust break is not holding enough and start working after 35mph and is anyway to make work how it was originally all this happening after the work that you guys know is not economic on fuel and is shaking a little bit smoking I don

[Jim P]

????

[Lean7Three]

Hello i have a 06-22 cm2450b IA80056.04 do you happen to have a 100% stock .ctz file?

[diesellan]

i have up to 2024 ram if anyone needed

[6cummins]

i have up to 2024 ram if anyone needed

Id like them if you have them!