View Full Version : 2020 cm2450b/aisin stock tune file
karch_13
June 1st, 2022, 04:49 AM
Hello everyone, I've tried searching for a stock tune file for my 2020 RAM 3500 but didnt find anything. Is there a place that i can get this from or would someone be willing to sell it to me? Thank you in advance.
Jim P
June 1st, 2022, 04:38 PM
I got a pile of them, what's the cal number on your ecm? It'll be an IA800xx.xx
Post up that number and I'll attach a tune file for you.
karch_13
June 2nd, 2022, 02:23 AM
Thank you Jim P,
My calibration number is IA80034.02
Jim P
June 2nd, 2022, 02:37 AM
Here you go.
karch_13
June 2nd, 2022, 04:43 AM
Thank you.
thestuarts
June 2nd, 2022, 04:49 AM
I got a pile of them, what's the cal number on your ecm? It'll be an IA800xx.xx
Post up that number and I'll attach a tune file for you.
I have a 2019 with CM2450B/aisin. The cal number is IA80002.17. Do you have a stock tune that correlates to PCM version 52401932AK which the dealer installed due to TSB TSB 18-010-21?
Thanks!
Jim P
June 2nd, 2022, 05:23 AM
Here is the .17 revision and the .21 revision which is CSP capable. Also have the .23 revision if desired.
thestuarts
June 2nd, 2022, 05:28 AM
Here is the .17 revision and the .21 revision which is CSP capable. Also have the .23 revision if desired.
Yes to the .23 version. Thank you!
Jim P
June 2nd, 2022, 07:14 AM
Here's the .23 revision
thestuarts
June 2nd, 2022, 08:05 AM
Here's the .23 revision
Thank you very much.
Jim P
June 2nd, 2022, 10:10 AM
:thumb_yello:
karch_13
June 22nd, 2022, 02:48 PM
Would you happen to have calibration file for IA80027.04 for CM2450B?
Jim P
June 23rd, 2022, 02:10 AM
Here you go sir.
DouglasG
July 16th, 2022, 11:07 AM
Hello I have a ram 5500 CM2450b, IA80003.16 maybe do you have?
Workbot
August 19th, 2022, 05:38 AM
hello I any looking 2020 ram 5500 cm2450b IA80091 P5361032PB or know of one that will work thank you
tsbrianesi
October 27th, 2022, 04:55 AM
Hi guys, I couldn't help but see your conversation...
I'm looking to know more about the cax files and also looking for stock files from IA80051.* Before the original Incal files I have from IA80001 to IA80051 I know there is much more.
Would anyone have them?
Iveco
August 13th, 2023, 11:42 AM
you wouldn't happen to have a file for a 2018 ram cummins 6.7 3500 with aisin trans would you ? cummins ecm code is D090019.02BDC operating system is 52150101
Hoseman
August 15th, 2023, 12:56 AM
Looking for 2450B 2019 3500 Aisin
E/C IA80003.15. ESM 59100698
trudynosports
October 3rd, 2023, 07:43 AM
I have attempted to flash a 19 5500 and it fails with a checksum error at the end. I was unaware of the new updates on these trucks. I'm looking of for the stock file to try to recover this truck. The stock part number was S5361932PB. I cant read the cal number as the ECM is dead right now, but I think its IA80088.01. I tried flashing an older version of a stock file and it fails as well so I's assuming I can only flash the latest one.
BYTES
October 5th, 2023, 07:06 AM
Ur bricked ecm will be a nice thanksgiving decoration piece
iw11
October 20th, 2023, 10:16 AM
Are these stock tunes only to unlock ecm, or are the runable stock tunes.
powerdmaxcummin02
July 1st, 2024, 02:07 AM
i am looking for a stock file for a 2021 cummins 3500 with aisin os # 152190700 cal id 52401932AI cummins ecm code AI80002.21 BHQ
tsbrianesi
July 4th, 2024, 06:42 AM
I have this IA80002.23, can you help?
wdieselrp
August 12th, 2024, 08:32 AM
Hey Jim P, can you help me out with a file? IA80113
jtdrns
August 15th, 2024, 11:41 AM
anyone have incals for 23-24 ram bhq
greenenthusiast
August 17th, 2024, 05:28 PM
Hey do you have for 22 3500HD B6.7 Cummins w Aisin AS69RC transmission IA80004.03 (or it might be IA800054.03)
jtdrns
August 18th, 2024, 09:04 AM
i have up to ia80061 would like to have newer but theyre not on the server, anyone have a way to convert .efd flash to xcal? i have latest just in .efd format
Jim P
August 22nd, 2024, 11:08 AM
Hey Jim P, can you help me out with a file? IA80113
I don’t have that calibration
alexandereva
October 17th, 2024, 01:07 PM
so im confused with everyone needing stock tune files are they the same as what you get off quickserve?
wdieselrp
October 17th, 2024, 01:09 PM
so im confused with everyone needing stock tune files are they the same as what you get off quickserve?
If you can download them from quickserve, let me know .
Jim P
October 17th, 2024, 01:09 PM
Show me that Cummins allows access to downloading any Ram Cummins calibration after 2018
alexandereva
October 17th, 2024, 01:23 PM
im new to all this why doesnt it allow you?
Jim P
October 17th, 2024, 01:23 PM
Because laws changed
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.