RC1
June 5th, 2022, 06:54 AM
Good day,
I'm having an issue with an E92 swap and a lack of throttle movement. This is a '14 Silverado V6, using the original ECM and the Silverado pedal. I've logged what I believe to be all of the important throttle PIDS, and I see that my ETCPP1 and ETCPP2 positions are reading 100% at full throttle, but the TPDES never goes higher than 40%. I've tried this test with the car running and with it shut off, and I get the same result. I also had a look at any throttle limiting stuff I could think of, but found nothing. Does anyone have any other thoughts on where to look next?
I've attached both logs, running and not running.
I'm having an issue with an E92 swap and a lack of throttle movement. This is a '14 Silverado V6, using the original ECM and the Silverado pedal. I've logged what I believe to be all of the important throttle PIDS, and I see that my ETCPP1 and ETCPP2 positions are reading 100% at full throttle, but the TPDES never goes higher than 40%. I've tried this test with the car running and with it shut off, and I get the same result. I also had a look at any throttle limiting stuff I could think of, but found nothing. Does anyone have any other thoughts on where to look next?
I've attached both logs, running and not running.