Adding Thermocouples to V2

[Flounder270Brian]

Hi

I currently have two thermocouples added on my v2 under the k type connection and a momentary switch for data logging. Is it possible to add more thermocouples ..to the ad_2 connectors on the left side bottom of v2.

Or am i limited to just the two.
. Was just considering adding egt to all cylinders while maintaining the moentary switch.

Cheers for any advice

Brian

[Blacky]

There are only 2 x K-type inputs.
2 x 12 V input switches
4 x 5V analog inputs.

More info here: https://download.efilive.com/Documentation/FlashScan%20V2%20Quick%20Start.pdf
See page 7.

Regards
Paul