AEM X-Series WB took out my Cluster/Aux BCM???

[Mean Green Z28]

Not sure where to post this.
2012 Vagon.
Bought and installed the AEM X-series WB with the Canbus OBD port option and as soon as it was plugged in, it took out the cluster. Tech2 shows no comm on cluster and other devices

Something AEM tech mentioned was that some of these cars have a known issue of active weird when OBD devices are connected and that therehttps://uploads.tapatalk-cdn.com/20221024/e8f5f01041a7802dd3d0227466be35f3.jpg

[ViktorY]

I have the same problem too

[Mean Green Z28]

I have the same problem too

Same as in cluster went out or other modules start acting up but reset once the gauge is disconnected?


Sent from my iPhone using Tapatalk

[Mean Green Z28]

So far I got advice to remove fuses 52/60/64 under the hood and also remove battery (not concurrently) and connect terminals together for a LONG time to discharge any capacitors in the system that may hold any charge to do a full reset. Let