View Full Version : the 2011 lml tune i have been working on
dan_verbruggen@live.com
October 23rd, 2022, 08:08 AM
can i get some pointers
truck is running and driving now trying to completly delete
dan_verbruggen@live.com
October 23rd, 2022, 08:26 AM
24236
this is how far iv got
any input would help
DaneF
October 23rd, 2022, 04:48 PM
Might be a bit tough to get help on here since doing so is illegal :nixweiss:
dan_verbruggen@live.com
October 24th, 2022, 08:54 AM
truck for off road
MatrixBDP
October 24th, 2022, 09:50 AM
Uh, it doesn't look like all that much has been done to this file compared to a stock one. Do you have a FlashScan?
dan_verbruggen@live.com
October 24th, 2022, 11:04 AM
24237
i just want to run and drive this file compaired to first will drive fine for 15 min the no throttle pedel
i have a flash scan v3
only thing other than shutting off egr throttle valve and dpf is i adjusted the torque to tps abit to 1200 from 1045 in mode 1
MatrixBDP
November 1st, 2022, 01:19 AM
24237
i just want to run and drive this file compaired to first will drive fine for 15 min the no throttle pedel
i have a flash scan v3
only thing other than shutting off egr throttle valve and dpf is i adjusted the torque to tps abit to 1200 from 1045 in mode 1
Yea, well E86A controllers are not what you should be starting on. They are very buggy. If you need help please reach out to me.
dan_verbruggen@live.com
November 13th, 2022, 05:15 AM
i got running and driving pretty good now thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.