jeepman173
December 3rd, 2022, 09:51 AM
Good afternoon, I am trying to tune a 2011 escalade esv with a stage 1 TSP VVT cam dod delete, 1 3/4 Long Tubes no cats stock exhaust system. I have pulled airflow out down low because of the cam swap, and I have perfect afr's 14.67-15.3 while cruising and driving, as soon as PE comes in drops to low 12's. I have started the autotune VE tutorial and have it completed to the point of adding filters, I cant for the life of me figure out where the "filters" tab is. So i have not actually done any sort of VE tuning. I have bumped the idle to 800. My mileage is definitely lacking from running rich. I dont understand how im showing stoich on my wideband but smell and mileage are saying its rich. I have added some timing down low in the idle areas, and that is about it. I have a bunch of logs and stuff that I have recorded and all the different tunes and changes i have made along the way. However, I didnt save the completely stock file like i thouhgt i did, I saved the stock file with the updated 800 rpms and no other changes so that is my "as found file".
***Disregard file name of tune, PE is back to factory, i was trying out different things and forgot to change the name of the file
***Also, is there an updated auto tune tutorial? It has taken me forever to find what i hope is all the correct maps and charts minus the filters i cant find, everything i find that I am trying to learn about is from 2007 era.
***Still waiting for null modem to hook lc2 to flashscan
***Disregard file name of tune, PE is back to factory, i was trying out different things and forgot to change the name of the file
***Also, is there an updated auto tune tutorial? It has taken me forever to find what i hope is all the correct maps and charts minus the filters i cant find, everything i find that I am trying to learn about is from 2007 era.
***Still waiting for null modem to hook lc2 to flashscan