PDA

View Full Version : Highest HP EFI tune to date


bobo
August 7th, 2006, 04:44 PM
Just pulled a 651hp run with a guys truck in Idaho on #2 Diesel only.:rockon: The best is yet to come. Thanks to EFI for such a wonderful product. We couldn't do this without you!
turbo lcc
August 8th, 2006, 12:37 AM
keep up the good work BobO
GMPX
August 8th, 2006, 02:16 AM
Great tuning job Bobo, us gas guys reading those numbers get a little sad , go the soot club :rockon:

Cheers,
Ross
sweetdiesel
August 8th, 2006, 05:31 AM
:cheers: :master: bobo i have been reading about that great job
Trippin
August 8th, 2006, 09:28 AM
Great job!
:cheers:
bobo
August 8th, 2006, 02:30 PM
These motors are built so well, it don't take much tuning to get to this point. We are currently limited to the amount of fuel we can get into the motor. This truck was running one CP3 pump. A second CP3 is in the works, maybe a third!
GMPX
August 8th, 2006, 03:33 PM
Why stop at three, one per cylinder :D
Trippin
August 8th, 2006, 03:48 PM
Why stop at three, one per cylinder :D

You beat me to it. I was thinking the same thing. :D
joecar
August 8th, 2006, 06:41 PM
Good work. :cheers:
foff667
August 9th, 2006, 02:40 AM
how many ftlb did that amount to? We need video :D
GMPX
August 10th, 2006, 01:32 AM
You don't want to know, it just makes us LS1 drivers shake our heads.
Either way, it is great to see all the trucks cleaning up at the tracks and the dynos are tuned with EFILive.

Cheers,
Ross
Trippin
August 10th, 2006, 03:50 AM
how many ftlb did that amount to? We need video :D

Probably near 1400 Ftlbs. Check my sig for typical Diesel HP/Tq #s.
foff667
August 10th, 2006, 04:02 AM
yeah anwhere between 1200-1700ft lb depending on where it peaked really.