PDA

View Full Version : VE table question................


FreddyG
August 9th, 2006, 05:03 AM
I've enclosed a picture of my VE table and was wondering why the 800/40 cell is light blue. Could someone Please explain this?

Modded VE table............. (http://home.comcast.net/~badassc5/Modded_VE.jpg)

Thanks in advance! :cheers:
SSpdDmon
August 9th, 2006, 05:12 AM
When your log is open at the same time the tuning program is open, it will highlight the current spot you're viewing in the scanner in the affected cell in the tuner. In other words, your scanner was probably at a point of idle with that MAP and RPM. Therefore, it's saying this is the spot where the PCM would be reading from according to what it's observing in the scanner.
kbracing96
August 9th, 2006, 05:12 AM
That is the cell that is currently linked to the scan tool. Its showing what value the PCM is using at that time in the log.
SSpdDmon
August 9th, 2006, 05:13 AM
That is the cell that is currently linked to the scan tool. Its showing what value the PCM is using at that time in the log.

Too slow. ;) :D
kbracing96
August 9th, 2006, 05:27 AM
Too slow. ;) :D
I shouldn't have spell checked it:muahaha:

But mine was shorter:D
FreddyG
August 9th, 2006, 06:11 AM
I got it! Thanks You Very Much for the help! I Appreciate it! :cheers:

I'm happy that it's nothing to worry about.
joecar
August 9th, 2006, 09:16 AM
In the tune tool options, if you turn on "Runway Highlighting" you'll see all intersecting row and column highlighted.
FreddyG
August 9th, 2006, 04:15 PM
Thanks JoeCar! :cheers: