PDA

View Full Version : Calc.Torque


purrvert
August 12th, 2006, 01:45 PM
Can't get CALC.POWER_FW to work. All the needed PIDS are selected and show as supported. GM.TRQENG also shows 0. Any sugestions?
TAQuickness
August 12th, 2006, 03:17 PM
you might try sending blacky a pm. So long as gm.trqeng reads 0, calc.power_fw will = 0.
dc_justin
August 12th, 2006, 03:52 PM
I have the same issue with my 02 WS6 M6. Assume that is has something to do with the trans being a manual...
purrvert
August 12th, 2006, 04:40 PM
I have the same issue with my 02 WS6 M6. Assume that is has something to do with the trans being a manual...

GM.TRQTRANS is reporting 442 ftlbs
noesfacil
May 10th, 2007, 03:32 AM
How did you get it to work?