View Full Version : Open loop tuning still has STFT
markemac
April 12th, 2024, 07:55 AM
Hi all trying to tune in open loop using wide band , then will put back in closed loop. 2000 silverado 8.1 w SC
when I data log I still show STFT making corrections, what am i missing?
markemac
April 13th, 2024, 03:22 AM
anyone have any input?
ChipsByAl
April 14th, 2024, 06:25 AM
Try putting (B3805) (B3806) (B4115) & (B4116) all to 1.00
Al
markemac
April 14th, 2024, 07:09 AM
Try putting (B3805) (B3806) (B4115) & (B4116) all to 1.00
Al
thanks
I did have (B4115) and (B4116) set to 1
will try (B3805) and (B3806) at 1
I don't understand how it can have correction in STFT if they were set to 1?
voda1
April 15th, 2024, 11:42 AM
Disable B3801
markemac
April 17th, 2024, 01:09 AM
Disable B3801
Thanks for the reply
I do have it disabled already,
not sure how it can show STFT changing with everything shut off?
voda1
April 17th, 2024, 03:52 AM
Going by tune posted above:
24597
What's the temp when STFT begins?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.