Scale tps ?

[turbo]

Is there a way to scale an after market tps ? The sensor is reading 0.0% with closed throttle but only reads 14.9% at 100% throttle blade angle, if you rotate the throttle well beyond 90deg it will read 100%, i believe its a Hall effect sensor if that makes any difference, I’ve just added a picture of the sensor we are trying to use

[robof16]

Is it a 12v reference instead of 5v?

[turbo]

Is it a 12v reference instead of 5v?

It goes from .1v too .6v with the scanner with full motion of the throttle, do you mean does it have 12v or 5v at the sensor?
I will have to go check that later today

[robof16]

I thought that the scale is off because the sensor may be designed to have 12v reference instead of 5v

[turbo]

I thought that the scale is off because the sensor may be designed to have 12v reference instead of 5v

i didnt get out there yesterday but i went there this afternoon and powered it all back up and its reading correctly now, must have needed the battery disconnected for longer ?