Twin Turbo Ls1 Chevelle Burnouts Video!

[nitrorocket]

I though I would share a clip I took this Sunday, I needed new tires that is why I did this!


http://thumbs.vidiac.com/1aae1a24-3c41-4fec-a8a1-981e018124aa.jpg (http://video.ls1tech.com/video/1aae1a24-3c41-4fec-a8a1-981e018124aa.htm)Click here to see Video (http://video.ls1tech.com/video/1aae1a24-3c41-4fec-a8a1-981e018124aa.htm)

[TLKSCHP]

I like :rockon: I like old school blended with technology

[Highlander]

It needs more tuning!!!

[nitrorocket]

I know, tell me about it!

[johnsZ06]

Tell us more about the 1000 hp LS1...please!

[nitrorocket]

What would you like to know??

It is a 347” LS1]
-8:1 compression
-TEA stage 2 heads
-LS6 intake
-224/224 .581 lift on 114 NA cam
-Aluminum block
-PT-61 turbos (680 hp each)
-Intercooled
-Approx 825 RWHP on 93 octane

[Doc]

What kind of transmission/ suspension setup do you have on it? Pics of the engine bay?

[nitrorocket]

I would have to post pics later today.

I have a t400, a 2500 rpm stall, and 3.42 gears right now.

I have all tubular rear suspension and lowered springs with competition engineering shocks righ now.

[joecar]

Nitro, your speedo thinks it's a tachometer, it climbs up so fast with ease... :D

[johnsZ06]

What would you like to know??

It is a 347” LS1]
-8:1 compression
-TEA stage 2 heads
-LS6 intake
-224/224 .581 lift on 114 NA cam
-Aluminum block
-PT-61 turbos (680 hp each)
-Intercooled
-Approx 825 RWHP on 93 octane

That's good! :cheers:

I noticed it had a stock sounding cam! I guess those T-61's must make the difference! Anyway, car sounded and looked good! Cute little girl BTW!

[Redline Motorsports]

Nice job in getting that motor setup in that car. The burnout is less impressive especially since you are on 17 or 18" low profile tires!

How about putting some slicks on it and gunning it down the track! Lets see the dyno sheet!

Oh yeah..............any pictures of the turbo setup??

Howard

[TAQuickness]

somethings wrong with your speedo. seemed to get stuck to the far right ;)

[nitrorocket]

Later I will post some pics.

The motor mad 751 rwhp on 93 octane with 14 psi and the little turbos. With the bigger turbos and the 18.5 psi I was running in the burnout vid, I am guessing 825-875 RWHP, with 93 octane!

I will probably never run a 15" slick. I have huge rear disc brakes that will not allow that. Oh well!