Blacky
January 13th, 2025, 12:50 PM
V8.4.71 Public Release
WARNING for all users:
Tune files saved using this release candidate software are not backwardly compatible with previous public release versions of the EFILive software.
Tune files saved using previous versions of the EFILive software are compatible with this beta version.
The method for calling Lua scripts from custom menus has changed, please see \Documents\EFILive\V8\User Defined Menus\SampleCustomMenu.txt for more info.
Full Release Notes:
What's New (https://download.efilive.com/Software/whatsnew_8_4_71.htm)
Version Numbers:
After installing this release you should have the following software and firmware versions installed:
[*=1]EFILive V8 software: V8.4.71
[*=1] FlashScan/AutoCal V3 Firmware: V3.00.142
[*=1] FlashScan/AutoCal V2 Firmware: V2.08.215
Download here:
Download V8.4.71_Setup (https://download.efilive.com/Software/V8/EFILiveV8.4.71_Setup.exe) (Updated Jan 15 2025, to fix Known Issue #1)
Download_V7.5.51_Setup (https://download.efilive.com/Software/V7.5/EFILiveV7.5.51_Setup.exe)
Known Limitations:
Limitation #1: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However, the DMA PIDs may no longer return valid data.
Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.
Limitation #2: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), that are specific to a custom operating system such as DSP2 or DSP5 PIDs when running a stock operating system, the values returned by those DMA PIDs will not contain valid information and should be ignored.
Workaround: Ignore unsupported DMA PIDs.
Known Issues:
Known Issue #1: The wrong firmware was included with the original update.
Workaround: Download and install the updated software above, or download the correct firmware using this link (http://download.efilive.com/Software/V8/EFILiveV3_00_142.efw). Save it to a temporary folder on your PC, then copy it to C:\Program Files (x86)\EFILive\V8\Firmware.
Regards,
The EFILive Team
WARNING for all users:
Tune files saved using this release candidate software are not backwardly compatible with previous public release versions of the EFILive software.
Tune files saved using previous versions of the EFILive software are compatible with this beta version.
The method for calling Lua scripts from custom menus has changed, please see \Documents\EFILive\V8\User Defined Menus\SampleCustomMenu.txt for more info.
Full Release Notes:
What's New (https://download.efilive.com/Software/whatsnew_8_4_71.htm)
Version Numbers:
After installing this release you should have the following software and firmware versions installed:
[*=1]EFILive V8 software: V8.4.71
[*=1] FlashScan/AutoCal V3 Firmware: V3.00.142
[*=1] FlashScan/AutoCal V2 Firmware: V2.08.215
Download here:
Download V8.4.71_Setup (https://download.efilive.com/Software/V8/EFILiveV8.4.71_Setup.exe) (Updated Jan 15 2025, to fix Known Issue #1)
Download_V7.5.51_Setup (https://download.efilive.com/Software/V7.5/EFILiveV7.5.51_Setup.exe)
Known Limitations:
Limitation #1: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However, the DMA PIDs may no longer return valid data.
Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.
Limitation #2: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), that are specific to a custom operating system such as DSP2 or DSP5 PIDs when running a stock operating system, the values returned by those DMA PIDs will not contain valid information and should be ignored.
Workaround: Ignore unsupported DMA PIDs.
Known Issues:
Known Issue #1: The wrong firmware was included with the original update.
Workaround: Download and install the updated software above, or download the correct firmware using this link (http://download.efilive.com/Software/V8/EFILiveV3_00_142.efw). Save it to a temporary folder on your PC, then copy it to C:\Program Files (x86)\EFILive\V8\Firmware.
Regards,
The EFILive Team