Log in

View Full Version : Jan 18, 2026, V8.4.85 public Release - Update 4


Blacky
January 17th, 2026, 02:22 PM
WARNING:
References to Activation Codes in the F7: Licenses window have been changed to Installation Codes.
When purchasing Installation Codes, the emails delivered by the on-line store will refer to the codes as Activation Codes.
Once the software is promoted to production, the emails will be updated to reflect the new Installation Code wording.


The previous public release is available here (http://www.efilive.com/download-efilive).

Release Notes:

What's New (https://download.efilive.com/Software/whatsnew_8_4_85.htm)


Version Numbers:
After installing this release you should have the following software and firmware versions installed:



[*=1]EFILive V8 software: V8.4.85
[*=1]FlashScan/AutoCal V3 Firmware: V3.00.158
[*=1]FlashScan/AutoCal V2 Firmware: V2.08.220


Download here:
EFILiveV8.4.85_Setup (https://download.efilive.com/Software/V8/EFILiveV8.4.85_Setup.exe)


Known Limitations:
See "What's New" for known limitations


Known Issues:
None.



Regards,
The EFILive Team
dansdieselp
January 27th, 2026, 05:06 AM
Getting the $0094 when trying to update firmware. Went back to the 8.4.82 version and it's fine. 8.4.84 did the same thing.
dansdieselp
February 18th, 2026, 04:51 AM
Getting the $0094 when trying to update firmware. Went back to the 8.4.82 version and it's fine. 8.4.84 did the same thing.

Bump
Blacky
February 18th, 2026, 11:56 AM
Getting the $0094 when trying to update firmware. Went back to the 8.4.82 version and it's fine. 8.4.84 did the same thing.

Hmm, that should have been fixed in this current release.
Can you save a *.htx trace file from the EFILive Control Panel after getting the $0094 error?
Send the trace file along with a support ticket here: https://service.efilive.com/new-ticket
Regards
Paul
Tre-Cool
February 21st, 2026, 04:39 AM
Paul, can you take a look at why V8 doesn't allow changes to how the VE is represented for the E40 ecu's.

No matter what i change in the settings, it looks like the fuel map stays in Default units. Same file in 7.5 will show % theoretical maximum.
Blacky
February 22nd, 2026, 12:22 PM
Paul, can you take a look at why V8 doesn't allow changes to how the VE is represented for the E40 ecu's.

No matter what i change in the settings, it looks like the fuel map stays in Default units. Same file in 7.5 will show % theoretical maximum.

Forgot to add the VE "flags" to the E40 calibration definition.
I've attached updated E40 *.cam files.
Unzip them into the folder: \Program Files (x86)\EFILive\V8\Cam\E40 - overwrite existing files.
You may need Windows admin privileges to save files into that folder.

Regards
Paul
Tre-Cool
February 22nd, 2026, 06:07 PM
Half Sorted, might need to tickle the A0001 boost ve map too.

I've also encountered a bunch of module error crashes when changing controllers in the scanner when i change between dashes. Only way to get out, is to kill v8 exe processes completely.

I.e If i logged an e38 data file. I would clear the log, then try change to say ls1 or e40 dash & i'd get a module error with an ok button that wont go away.

Will post screenshot when it does it again.
Blacky
February 22nd, 2026, 10:51 PM
Added the A0001 table.
Blacky
February 23rd, 2026, 10:42 AM
Update here: https://forum.efilive.com/showthread.php?31953-Feb-24-2026-V8-4-86-Public-Release-Update-5