Log in

View Full Version : Feb 24, 2026, V8.4.86 Public Release - Update 5


Blacky
February 23rd, 2026, 10:42 AM
Release Notes:

What's New (https://download.efilive.com/Software/whatsnew_8_4_86.htm)


Version Numbers:
After installing this release you should have the following software and firmware versions installed:



[*=1]EFILive V8 software: V8.4.86
[*=1]FlashScan/AutoCal V3 Firmware: V3.00.159
[*=1]FlashScan/AutoCal V2 Firmware: V2.08.220


Download here:
EFILiveV8.4.86_Setup (https://download.efilive.com/Software/V8/EFILiveV8.4.86_Setup.exe)


Known Limitations:
See "What's New" for known limitations


Known Issues:
V2 devices reject updated *.obj files due to a version mismatch - see post #8 below for updated V2 firmware.



Regards,
The EFILive Team
MarkBroviak
February 25th, 2026, 04:51 PM
Still having this same issue with this new update that was supposed to fix it. Autocal's won't firmware update. I turned in a help desk ticket with it. Thanks!
dansdieselp
February 26th, 2026, 01:20 PM
Seems to only be an issue with V3 Flashscan's and Autocals. V2 versions update just fine.

BTW, if you update the firmware in EFILive Explorer it doesn't throw the error and it programs in fine.
dansdieselp
February 26th, 2026, 01:27 PM
Here is another issue that a customer brought to my attention when trying to load his Quick Setup file into his V2 Autocal. I was able to replicate it on my computer. 24971

After customer installed the Config settings manually, it throws a $050B.
MarkBroviak
February 26th, 2026, 02:43 PM
Yes, same issue I am seeing. Went back to update #3 and it all works fine.
Blacky
February 26th, 2026, 03:56 PM
Here is another issue that a customer brought to my attention when trying to load his Quick Setup file into his V2 Autocal. I was able to replicate it on my computer. 24971

After customer installed the Config settings manually, it throws a $050B.

Did you (or your customer) update the firmware? The latest *.obj scripts will ONLY work with the latest firmware.
Regards
Paul
dansdieselp
February 27th, 2026, 06:11 AM
Yes. Both his and the one I have here are up to date. I'll give him the link to RC3 for now and see if that gets him going.
Blacky
March 1st, 2026, 05:18 PM
Here is another issue that a customer brought to my attention when trying to load his Quick Setup file into his V2 Autocal. I was able to replicate it on my computer. 24971

After customer installed the Config settings manually, it throws a $050B.

This updated V2 firmware should fix the *.obj version problem.
Regards
Paul
Blacky
March 1st, 2026, 07:55 PM
Update here: https://forum.efilive.com/showthread.php?31955-Mar-02-2026-V8-4-87-Public-Release-Update-6