PDA

View Full Version : Os Faq



TAQuickness
August 27th, 2006, 12:32 AM
What is this thread for?
This thead is to cover frequently asked questions about PCM Operating systems (OS). This thread will be monitored and pruned on a regular basis.

Can I upgrade my 1997-1998 OS to a 1999+ OS?
Unfortunately, no. The '97 '98 PCM's are a different hardware platform and will not support the later operating systems.

How do I upgrade my 1999+ OS to a later year OS?

You will need the Commercial or Workshop version of EFILive in order to perform OS upgrades. Commercial and Workshop licenses can be purchased here (http://www.efilive.com/c-5-Upgrades.aspx)

Go to Holden Crazy (http://www.holdencrazy.com/EFILive/stockTunes.php) and download a stock tune from a matching make model as you are upgrading.

Edit:
For those starting from scratch, Holden Crazy (http://www.holdencrazy.com/EFILive/modifiedTunes.php) has been updated with stock 1999 calibrations on 2002 OS's. Currently you can download a 1999 A4 Camaro on 2002 OS and a 1999 M6 Camaro on 2002 OS. More conversions to come...

Open two instances of the tune tool. In the first instance open your oringinal tune. In the second instance open the tune you are upgrading to.

You will then need to copy and paste each table over. During the copy paste process, you will notice not every table between the two tunes exists in the other (i.e. back up ve table). Don't worry about these tables. You will also find in some tables, that the row's and columns are inverted. The tune tool has a utility that allows you invert tables. To get to this utility press ctrl+alt+enter.

This may take you several hours to compete, but it is necessary. Just be patient and make sure you get every matching table copied over.

When the copy process is complete, you will need to perform a full flash to get the later OS into your PCM.

When the flash is complete, you want to download the tune from the PCM, then compare the downloaded tune to the tune you flashed into the pcm. There should be no differences. The comparison is a very important step to make sure the download was sucessful.

How do I upgrade to a custom OS?
From the scan or tune tool, click Help -> Tutorials -> Custom OS Upgrade Tutorial

TAQuickness
August 27th, 2006, 08:37 PM
What tables are inverted?


Spark ECT Table
Optimal Timing
Catalytic Converter Light Off

TAQuickness
August 27th, 2006, 08:38 PM
Which OS's are similar?



I did this too, from 12202088 to 12212156, I found no inverted tables in this transition (or at least I didn't see any).



12202088 and 12212156 had the exact same tables from my recollection :) Same with 12202088 to 12225074 (Holden 2001-2002 conversion).

TAQuickness
September 1st, 2006, 10:34 PM
Tips on setting up Valet Mode

http://forum.efilive.com/showthread.php?t=2386

TAQuickness
September 24th, 2006, 11:56 PM
After reading the Custom OS Tutorial, How do I set up OS5?

http://forum.efilive.com/showthread.php?t=2599[/URL]

Specifically:

Here is the relink to that thread: [URL="http://forum.efilive.com/showthread.php?t=2599"]showthread.php?t=2599 (http://efiforum.iqd.co.nz/showthread.php?t=2599)
Thanks Joecar

TAQuickness
November 29th, 2006, 11:47 AM
Logging a 2+ BAR MAP sensor...


A 2bar map needs sae.map as the pid .....not gm.map...

TAQuickness
December 17th, 2006, 08:48 AM
When converting from a 99 to 02 OS the following tables cannot be transfered:

{B5911}
{B5907}
{B3334}
{B3335}
{B3336}
{B6245}
{B6612}

There are various mis-matched tables between the OS's that have to "best-fit"

joecar
January 15th, 2007, 06:14 AM
"What are the differences between the various COS's...?"



COS1
restored dual spark maps for running in SD

COS2
Same as COS1
Added Valet mode

COS3
Same as COS2
Replaced B3605 (ECT vs MAP OL Fueling) with B3647 (RPM vs MAP OL fueling)
IAT VE multiplier
ECT EQ multiplier
Added Boost VE table
Added Boost Timing tables

COS5
Same as COS3
added TPS vs MAP VE table
additional functionality added for PCM Pin 56 (e.g. N2O).There was no public COS4.

BowlingSS
January 15th, 2007, 09:35 AM
After reading the Custom OS Tutorial, How do I set up OS5?

http://efiforum.iqd.co.nz/showthread.php?t=2599

That is a very long thread for setting up COS5. Why not modify the toturial for the COS5?

Bill
:beer: :wave:

joecar
January 15th, 2007, 09:46 AM
That is a very long thread for setting up COS5. Why not modify the toturial for the COS5?

Bill
:beer: :wave:Bill,

Good point, the tutorial should be updated to include the COS5 features.

Joe

1000HP
March 5th, 2007, 01:47 PM
I have a quick question. Is COS5 available for an 04 OS

dc_justin
March 5th, 2007, 02:37 PM
I have a quick question. Is COS5 available for an 04 OS

It is not available at this point in time.

Kevin Doe
October 1st, 2007, 01:15 AM
Any ideas on when COS5 will be availabe for an 04 OS, specifically 12587604?

Afterhours Performance
November 11th, 2007, 05:00 PM
what kind of parameters are there for the pin 56 activation?? RPM, Coolant temp, etc.?? is it like the fan controls?

joecar
June 5th, 2008, 01:19 AM
After reading the Custom OS Tutorial, How do I set up OS5?

http://efiforum.iqd.co.nz/showthread.php?t=2599Here is the relink to that thread: showthread.php?t=2599 (http://forum.efilive.com/showthread.php?t=2599)

Highlander
June 15th, 2008, 12:30 PM
What custom OSs are available for later year GMs?