Need help SD

[447 LS2]

Help
I have tried to SD tune but every time i start car it runs but won't take any fuel then stalls i have treid everything. What im i doing wrong.

Please someone send me a sd tune file for a 02 ZO6 447 that maybe i can get car running then see where i went wrong. i have 42lbs injectors.
Post it here or send it to me email.
Thanks Steve

[Tordne]

As you posted in here I am assuming you are actually running EFI Custom OS. If it is version 3 or 5 OS then check that you have a value of at least 1.00 in your
A0008 table or you will be multiplying your fuel table potentially by 0 ;)

If not post up your tune, or email to me (email address in my profile) and I'll have a look for ya.

Cheers,

[ringram]

.. and check out the tune respository andrew has at www.holdencrazy.com you might find something useful there.
(http://www.holdencrazy.com)

[TAQuickness]

can you post your tune?

[dfe1]

Help
I have tried to SD tune but every time i start car it runs but won't take any fuel then stalls i have treid everything. What im i doing wrong.

Please someone send me a sd tune file for a 02 ZO6 447 that maybe i can get car running then see where i went wrong. i have 42lbs injectors.
Post it here or send it to me email.
Thanks Steve
Have you modified the C6101 table (Predicted Air Flow)? If you don't, you'll run into the type of problems you're describing.

[BowlingSS]

:beer:
Help
I have tried to SD tune but every time i start car it runs but won't take any fuel then stalls i have treid everything. What im i doing wrong.

Please someone send me a sd tune file for a 02 ZO6 447 that maybe i can get car running then see where i went wrong. i have 42lbs injectors.
Post it here or send it to me email.
Thanks Steve

Any news on your problem yet? I had that problem when I went to COS 3 because I had a table units set wrong.

Bill
:beer: