View Full Version : SVO 30's
jfpilla
September 21st, 2006, 08:22 AM
I had my injectors flow tested. They came up at 38.6 lbs/hr.
Attached is the IFR calculator.
SSpdDmon
September 22nd, 2006, 12:57 AM
Are these the red tops? Just goes to show for "professional tuners"....mine were set at 4.3125~4.71875grams/second.
Bruce Melton
September 22nd, 2006, 02:01 AM
Thanks, that is helpful. I had figured ~36#.
jfpilla
September 22nd, 2006, 05:47 AM
They are the red tops. There are some things that are interesting to me. The question of 40 or 43.5 as the psi for the SVO's seems answered. 1lb/hr=.125997881gm/s. Using 40 in the calculator results in 4.55 at 0. 4.55/.125997881= 36.1. It appears 36lbs is a reasonable number. I'd like to see someone else test the 30's also.
I also chose to change my IFR table by using the % difference between stock and the new flow number, not as shown in the calculator. The difference is very slight so it probably doesn't matter.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.