PDA

View Full Version : Value changing: is this possible?



AGRO
September 23rd, 2006, 09:58 PM
Hi all, i have been really giving the rrpcm a workout,:) me being a huge fan of convenience, i was wondering how i can adjust values without too much fuss, eg, instead of taking a percentage out of the ve you know type the number in, select the cell and hit the % button, couldnt we use the keyboard arrows? or pge up/down or something?

hope i explained that well.!!!

Agro.

ChipsByAl
September 24th, 2006, 04:17 AM
Agro, I'm not sure if I completely understand you but here goes. If you select one or more cells in a pane, you can "CTRL" & "-" or "+" to decrement or increment by the minimal value. It may not be fast but perhaps something you can use. Note these keys are not on the numeric keypad to the right of the qwerty keys, you must use the ones next to the backspace key.
Al

AGRO
September 24th, 2006, 07:40 PM
cool, that works ok, its a start, it would be nice to use pge up pge down controlls to drastically increase/decrease values.

Tordne
September 24th, 2006, 07:44 PM
There are some other keyboard shortcuts ;)

F7|F8 increments/decrements by 1.00
Ctrl + F7|F8 increments/decrements by 0.10
Ctrl +|- increments/decrements by 0.01

Hope that helps,

AGRO
September 24th, 2006, 07:50 PM
hey now were talking, well thats a good enough excuse to go out for a play huh?

Tordne
September 24th, 2006, 07:55 PM
LOL.. Just be careful - those are Real Time changes remember ;)

AGRO
September 24th, 2006, 08:00 PM
and thats the best part, the rrpcm has cut tuning time by at least 70%

Tordne
September 24th, 2006, 08:02 PM
Thats no good. What else will you do with your days if you tune too quickly?

AGRO
September 24th, 2006, 08:16 PM
i keep mucking around with my own car, alway looking for issues to fix, when i cant find one i create one!!!!

Tordne
September 24th, 2006, 08:21 PM
I can recommend installing some injectors that are just too damn big. That will keep you going for a while :Eyecrazy:

AGRO
September 24th, 2006, 08:35 PM
lol! that sound's interesting

nitrorocket
September 25th, 2006, 03:14 AM
I can recommend installing some injectors that are just too damn big. That will keep you going for a while :Eyecrazy:


RR would have definetly saved me a couple minutes tuning my 96's!:bash:

Tordne
September 25th, 2006, 06:05 AM
Nitro, I hear ya mate!!! I gave up on the SVO 42's in stock bottom end. Was kinda like a Boeing 747 coming in to land with too much fuel at low map/rpm. Was basically just dumping it :) Gas prices are better these days, but they'll never be that good :cheers:

eboggs_jkvl
September 25th, 2006, 06:48 AM
You all are sissies! You want a challenge!

1,3,6, 8 get 42#
2,4,5, 7 gets 96#

Now that's a tuning challenge! :D:D:D


Elmer

nitrorocket
September 25th, 2006, 06:49 AM
You know, it would be cool if you could "rent" the RR PCM for a week or so to get those hard to tune setup dialed in perfectly. I would like to do more work on De-accel, but I just don't have the time to change 50 different parameters and keep loading new tunes to see if one or the other helps.

nitrorocket
September 25th, 2006, 06:51 AM
Come on, give us a hard one!:?


You all are sissies! You want a challenge!

1,3,6, 8 get 42#
2,4,5, 7 gets 96#

Now that's a tuning challenge! :D:D:D


Elmer