Beer99C5
October 9th, 2006, 09:35 PM
Assuming that VE and the MAF tuning pans out, will there be cells in the upper MAF freq area (B5001) I do not hit NA? Keep in mind if I was home I would try it instead of asking it :bash:
That being the case I believe I will hit the higher cells when spraying the dry shot through it.
If that is true, I should be able to manipilate the upper MAF freq "Value" in table B5001 seen only with Nitrous to trick the PCM to targeting say 11.5-12 AFR when spraying dry only? Or does PE have priority over what the MAF says?
Probably done/tried already by someone, but I have not read anything about trying this idea, or if its feasible or not.
That being the case I believe I will hit the higher cells when spraying the dry shot through it.
If that is true, I should be able to manipilate the upper MAF freq "Value" in table B5001 seen only with Nitrous to trick the PCM to targeting say 11.5-12 AFR when spraying dry only? Or does PE have priority over what the MAF says?
Probably done/tried already by someone, but I have not read anything about trying this idea, or if its feasible or not.