PDA

View Full Version : V2 AFR display?



Bruce Melton
November 10th, 2006, 05:37 AM
If one were to buy a new wideband without a display such as the new PLX and they configured the proper PIDs, would V2 display the current AFR on it's baby blue screen?

TAQuickness
November 10th, 2006, 06:36 AM
I believe so. Of course, it will be much easier to configure if you have the WB controller so you have the linear 0-5vdc signal.

I run dual LC-1's with no gauge just fine. Although I haven't attempted to view it on V2 yet.

Tordne
November 10th, 2006, 09:18 AM
It is planned, not yet though.

Bruce Melton
November 10th, 2006, 09:40 AM
What I am thinking is that this $200 WB:

http://www.plxdevices.com/products_SMAFR.htm

With V2 would be a cheap WB solution for tuning, serve as a stand alone WB of sorts as well as a selling feature for V2.