November 14, 2006 v7.3.3 is now available.

[Whippled 496]

When is 7.3.3 going to be available for download? It was shipped Friday correct?

[Cougar281]

Any updates?

[Whippled 496]

still nothing?

[Blacky]

It's available now, just not publicly posted on the downloads page. There will be an update posted in a few days, so be sure to come back in about a week to check for an update. Once the update is available they will both (the full download and the update) be posted on the web site.

The update will fix the following known issue(s):
1. The operating system list in the "Change VIN" window is empty.

The EFILive software V7.3.3 CD image is available for download.

http://download.efilive.com/software...50_580_520.zip (http://download.efilive.com/software/EFILiveV733_450_580_520.zip) (90.7Mb)
http://download.efilive.com/software...50_580_520.md5 (http://download.efilive.com/software/EFILiveV733_450_580_520.md5)

Or download from this mirror:
http://gmtuning.info/files/EFILiveV733_450_580_520.zip

It contains everything that the manufactured EFILive CD contains except for the following two items:
1. Adobe PDF reader software, you can download the latest adobe reader software, free here: http://www.adobe.com/products/acrobat/readstep2.html (http://www.adobe.com/products/acrobat/readstep2.html)
2. The EFILive intro video presented by Ben Strader from EFI University.

Download the zip file, extract it and optionally burn it to a CD.
To run the install, double click on the EFILive_Installer.exe program.

If you have a FlashScan V2, please make sure you are running firmware V2.4.38 or later. It contains an important fix to prevent PCM reads from hanging or failing prematurely. You can check the firmware version in your FlashScan V2 device using the menu sequence: F4->F1->F1, then scroll down to the Firmware version display. If your FlashScan V2 is using an earlier version, please reflash it with the firmware (*.ffw file) contained in the zip file.

IMPORTANT: I highly recommend backing up your existing *.tun and *.efi files, then uninstalling the existing EFILive software BEFORE installing the V7.3.3 software. That is because some objects and files are now stored in different locations. For example: the start menu items have been re-arranged and the calibrations folder has been split into multiple sub folders. If you do not uninstall first, then the old V7.2.2 files and menu items will remain, and could cause a conflict at some later stage

Regards
Paul

[Whippled 496]

Sweet, thanks Paul. Will this version fix the PID issue with Allison equipped trucks mentioned here......

http://forum.efilive.com/showthread.php?t=3484

[Blacky]

Sweet, thanks Paul. Will this version fix the PID issue with Allison equipped trucks mentioned here......

http://forum.efilive.com/showthread.php?t=3484
Yes.

To generate the correct *.vpl files, you will need to manually re-validate the PIDs for both the ECM and TCM.

Regards
Paul

[Whippled 496]

Beautiful!

[Bruce Melton]

This will keep me happy and busy till the magic box gets here.
What is the .md5 file?
Thanks,
Bruce

[Tordne]

md5 file is just a checksum so that you can run an md5sum on the download to verify that it is downloaded correctly.

[Bruce Melton]

md5 file is just a checksum so that you can run an md5sum on the download to verify that it is downloaded correctly.

Well, thanks at least now I know what I could have done, maybe next time?

[05lly2500hd]

Is this download above the TNT and DSP5, etc. or is it just an update for the Vin# probs?

[Happy Jim]

If you have a FlashScan V2, please make sure you are running firmware V2.4.38 or later. It contains an important fix to prevent PCM reads from hanging or failing prematurely. You can check the firmware version in your FlashScan V2 device using the menu sequence: F4->F1->F1, then scroll down to the Firmware version display. If your FlashScan V2 is using an earlier version, please reflash it with the firmware (*.ffw file) contained in the zip file.

Regards
Paul

I need to do this to mine, but I'm probably being a little dense and am missing the button marked "push me to reflash" - I've got the ffw file, how do I reflash the V2?

Cheers

Jim

[Happy Jim]

OK, found it and re-flashed successfully.

Jim

[Blacky]

Is this download above the TNT and DSP5, etc. or is it just an update for the Vin# probs?

It does not contain TNT or DSP5.
Regards
Paul

[turbo lcc]

It does not contain TNT or DSP5.
Regards
Paul


any ideas when DSP5 will be out :D

[Treurentner]

Hi Paul,

great soft,

found that the old foodpound to newtonmeter (GM.TRQENG) pid bug was solved:notacrook:
And now we have the real BIG numbers...

Btw this car was dynoed with 706 Nm /4679 rpm)at the crank (so the PCM calculations are ony 5% off), after that too much wheel spin for the right max Hp numbers, should be close to 500 at the wheel.

Good work, I hope that I can order the V2 hardware soon (still collecting money):cheers:

Best regards from all af our Corvette-clubmember here in Germany.

Marco

[02Z06]

Would it be possible to get the .ffw file broken out separate from the 7.3.3 file. I have a dialup connection and it is to much to down load that whole file.


Thanks, Jim

[Tordne]

The firmware file is tiny to be honest.... Would make a difference of perhaps 3 seconds on download.

Edit: If you just want the firmware file (and not the 7.3.3 release) then I can host it temporarily.

[Blacky]

Attached.

[bink]

I have v7.3.2 installed. I use it on my 01 Z06.
Are there new tables in v7.3.3, versus v7.3.2, that would apply to LS1/LS6???
TIA.
:cheers:
joel

[Tordne]

Pretty sure that the release is pretty much to enable support for the V2 interface, as well as the new cals for the LS2 PCM.

[bink]

Pretty sure that the release is pretty much to enable support for the V2 interface, as well as the new cals for the LS2 PCM.
Thanks Andrew! I'll wait until I upgrade to V2 then.
:cheers:
joel

[Cougar281]

Wasn't there talk of a new build of 7.3.3 being released this weekend?

[ScarabEpic22]

Wasn't there talk of a new build of 7.3.3 being released this weekend?
Yea, download it now. Has some LL8 support which means Im downloading it as I type!