dbaxter_ss
April 16th, 2005, 12:55 PM
Ok here is what I see happening.
I select multiple cells, so far happening in any of the tables, when you highlight multiple cells and as in the pic below the last cell is what I want all of them to be - in this example 63, it appears to take the 63 but then never changes the rest of the cells.
Now in reverse, if I select all the cells the other direction and what I am looking for is not in the last cell selected, in the pics 62 was the last cell and 63 is what I want to make them it takes.
Cell overwritting is 63 and I want all the selected cells to be 63
http://www.2001camaross.com/files/table2.png
hit enter and nothing happened
http://www.2001camaross.com/files/table1.png
works - the cell I am over writting was 62 and putting 63 in:
http://www.2001camaross.com/files/table3.png
All cells took the change to 63
http://www.2001camaross.com/files/table4.png
I select multiple cells, so far happening in any of the tables, when you highlight multiple cells and as in the pic below the last cell is what I want all of them to be - in this example 63, it appears to take the 63 but then never changes the rest of the cells.
Now in reverse, if I select all the cells the other direction and what I am looking for is not in the last cell selected, in the pics 62 was the last cell and 63 is what I want to make them it takes.
Cell overwritting is 63 and I want all the selected cells to be 63
http://www.2001camaross.com/files/table2.png
hit enter and nothing happened
http://www.2001camaross.com/files/table1.png
works - the cell I am over writting was 62 and putting 63 in:
http://www.2001camaross.com/files/table3.png
All cells took the change to 63
http://www.2001camaross.com/files/table4.png